• Insulated studs with no thermal short circuit
• No voids in insulation due to improper installation, unlike fiberglass which requires precise installation for good performance
• Increased thermal performance of the building envelope

2. Solid Surface Attachment

• Full width attachment studs are located 16" o.c.
• The studs at the surface eliminates the "hit or miss" method of screw attachment, unlike trying to screw long fasteners through several inches of foam to studs underneath
• Attachment studs transfer the pullout and shear stresses directly to the substrate

3. Simplicity

• 3 in 1 panel does framing, insulation, and rain screen technology all in one easy step
• Tongue and groove edges speed up installation
• Alignment notches ensure correct panel location
• Two easy installation options: adhesive or nails/screws

4. Rain Screen Technology

• Easy, quick drying drainage system
• Drain & Dry Channels handle bulk water
• Tongue and Groove edges keep water out
• Doesn't rely on taped seams to keep water out
• Provides an extra layer of cladding from the elements

5. Installs over most any Surface

• Siding
• Stucco
• CMU Masonry
• Brick exteriors
• Poured Concrete
• Wood or Steel framed construction

6. Faster Installation

• Installation rate: 300 - 400 SF/HR
• Three steps in one panel means fewer ups and downs on the scaffolding or ladders
• Easy to handle 4' x 2' panels reduce waste and make cutting around openings easier than large sheets of foam
• InSoFast panels are easy to cut

7.Compatible with most Exterior Claddings

• Stucco
• Vinyl Siding
• Wood Siding
• Cement Board Siding
• Steel or Aluminum Siding
• Brick and Stone Veneers

8. Weather Resistive Barrier with Smooth Surface

• Complete one step Weather Resistive Barrier
• Surface is flashed to keep water from migrating to the substrate
• Easier and more effective than long rolls of house wrap
• Surface is not breached by hundreds of staple holes
• Taping of the seams is not required

9. Will not Rot, Twist, Warp, or Decay

• Unlike wood products, InSoFast panels with not rot, twist, warp, or decay
• Closed-cell foam works like Gortex fabric, which allows moisture vapors to transfer through the foam panel while keeping liquid moisture away from the structure
• InSoFast foam panel and studs are mold resistant
• Like a foam cup, InSoFast's closed-cell foam will not soak up or absorb liquid water

10. 40% Recycled Content

• The InSoFast panel is environmentally responsible with a 40% recycled post-consumer waste
• The panel and studs are fully recyclable
• InSoFast is a solid insulation that will not diminish in thermal performance and will be there for generations to come