Floor 20’ UX 2.0 – Bundle

Product Overview

The UX 2.0 Flat Panel is vesitale solution for applications like shipping container sub-flooring. 

This floor bundle contains:

  • 4 Boxes (UX 2.0 Panels 5 each) = 160 sq-ft.

$397.60

4 Box UX 2.0 Panel Bundle 160 sq.ft of sub-flooring

Shipping Container Sub-flooring

Insulating a shipping container floor with the InSoFast flat panels increases thermal performance. Just insulating between the flooring beams @ 12″ on center, the steel beams, a super conductor of thermal energy will deliver a U-Value thermal penalty of .109.  What that means an R-19 insulation placed between the beams the effective R-Value, will be, (1 ÷ 0.109 = R-Value of 9.17)   Adding the UX 2.0 (R-8.5) flat panels to a container floor can double performance and increase comfort. 

This floor bundle is part of an assembly with enough material to finish one 40 High Cube or standard container floor. The studs are 16 inches on center.

        • 20′ HC/Standard Bundle – (UX 2.0-4Boxes of 5 Panels) =160 sq-ft.
UX 2.0 FLOOR BUNDLE

2″ thick  of closed-cell, injection-molded EPS foam body achieves R-8.5 insulation The UX2.0 is our thinnest panel, optimized for flat surface interior finishing. The UX 2.0 will work on floors, walls, ceilings adapted for shipping container construction. It is a good choice as a sub-flooring base panel for shipping containers.

PROPERTIES

Panel Dimensions

24in × 48in × 2in

Horizontal Chase

48in × 1in × ¾in

Vertical Chase 24in × ¾in × ¾in
Coverage 

8sq-ft

R-Value ASTM C518

R-8.5

ASTM C578 Type II

Closed-Cell, injection-molded EPS

Canadian Standards  CAN/ULC S701 Type 2
Co-Polymer Polyproylene Insulated Stud

Surface

Interlocking Edges

 

Cutting Indication Lines

 

Code Depth Raceways

 

Ready for Finishing

 

Interiors

 

Exteriors

 

Installing Panels on the Floor video

Calculating Floor Loads

You will need to determine what loading (weight per square foot) is acceptable for your local building codes.

For the most part, live load and dead load values for floor systems are considered “distributed loads.” The total weight is distributed or shared uniformly by the members in the floor system. InSoFast panels are uniform because they have 100% contact with the concrete and subflooring. Our product testing determined that InSoFast panels can support 13 lbs per square inch of compressive resistance at 10% strain deformation. This equates to 1872 lbs per square foot for the design load, well within most residential construction specifications.

Table 3.4 is taken from the U.S. Department of Housing and Urban Development Office of Policy Development and Research’s 

Estimating Panels

Estimating and ordering is simple measure the square feet of floor surface that it requires to complete the job. Divide the total square footage by 40 sq.ft per box and that will give the box requirement for the project, (round up to the whole box count).  Don’t overestimate.

  • One (UX2.0 Insulated Panel = (8 sq.ft)
  • One box of  5 (Insulated Panels = (40 sq.ft)
Freight Details / Dimensions Weight
We offer free curb side deliveries on all of our orders.

You may upgrade your delivery service for an additional charge. LIFT GATE SEVICE IS AN ADDITIONAL CHARGE. Please read through our shipping and purchasing policies, for more details before placing your order. 

Product Code

Number of Parts

Box Dimension

Cubic Feet Per Box

 Weight Per Box

Length

Width

Height

UX2.0

5 Panels 40 SqFt

11″

25″

49″

7.80

20 Lbs

EXi2.5

5 Panels 40 SqFt

13″

25″

49″

9.22

22 Lbs

Add R-Value with InSoFast PLUS

It’s easy to increase your R-Value beyond R-10 while maintaining the engineered benefits of the continuous InSoFast panels. Just start with a base of feature-rich InSoFast panels.