20′ Shipping Container (High Cube 9′) Example

For project orders, you will need to know the total square footage of the surface you wish to insulate.

We offer free shipping on all our orders. You may upgrade a project order to FedEx Home Delivery for an additional charge. Please read through our shipping and purchasing policies before placing your order.

VERIFY ALL CONTAINER DIMENSIONS PRIOR TO ORDERING! The CX44 panel is designed to fit the 44" o.c. weld seams. SEE Drawing.

Example Package for a 20' HC

Side Walls
CX Panels 10 Boxes
End Wall
End Wall Inserts
UX 2.0 Panels
1 Box
2 Boxes
Ceiling
Ceiling Inserts
UX 2.0 Panels
1 Box
4 Boxes

$1,860.40 Add to cart

Add On Floor Option

UX 2.0 Panels 4 Boxes

$397.60 Add to cart

Add On Door Option (Per Door)

EXe 2.5 Panels 1 Boxes

$109.40 Add to cart

Loctite PL Premium

LOCTITE® PL PREMIUM® POLYURETHANE CONSTRUCTION ADHESIVE

How much glue do I need, or Estimating Adhesive Quantity

Estimating the amount of adhesive YOU will use has variables beyond our control like condition of your walls and how accurate are you with a glue gun? Adhesive follows the "Goldie Locks rule, too much, too little, and just right. If you are doing just right you can expect that 1 large 28-fl oz tube will cover 18 of our 24" long studs or enough glue at a 3/8" bead to cover 36 foot long bead of glue. The example below is how much Loctite PL Premium you will use for one 20 foot long container sidewall. You will need approximately 3 tubes of the adhesive. That is in a perfect world. 

  • 1 large 28-fl oz / 828 mL tube = 18 (24" studs or inserts)
    • CX 44 (22 panels with 2 studs each plus 8 end wall edges) = 52
    • 52 ÷ 18 = 3 tubes of the adhesive

The example above  for one side wall of a 20' standard height shipping container Additionally you will have to estimate for glue around openings like windows and doors.  

LOCTITE® PL PREMIUM® POLYURETHANE CONSTRUCTION ADHESIVE Rough estimate for  28 ounce tubes of adhesive required
Container CX 44 Side Walls End Wall and Inserts Ceiling and Inserts Swing Doors Floors Total without doors and floors Total Estimate with doors and floors
20' Container - Standard 3 Per side total 6 2 1/2  6 1/2 3 7 13 23
20' Container - High Cube 3 Per side total 7 2 1/2  6 1/2 3 7 14 24
40' Container - Standard 6 Per side total  12 2 1/2  13 3 14 28 45
40' Container - High Cube 6 Per side total  13 2 1/2  13 3 14 29 46

Safety Precautions
Wear gloves. Cured adhesive on bare skin will not come off immediately with washing and will cause skin to darken. Cured adhesive and discoloration will come off in about 3 days.

Preparation
Use above 40°F (4°C). Surfaces must be clean, dry and free of frost, grease, dust and other contaminants. Pre-fit all materials and protect finished surfaces. If using cartridge format, cut nozzle at a 45° angle to desired bead size and puncture inner seal. Be very careful not to allow Loctite® PL® Premium to cure on a finished surface.

Application
Apply adhesive to one surface of the material being bonded. Press the surfaces firmly together. Materials may be repositioned within 45 minutes after applying the adhesive. If bonding two non-porous surfaces (such as foam, metal and fiberglass), add water in the form of a very light or atomized spray from a plant mister bottle to the extruded adhesive. The repositioning time will then be reduced to less than 30 minutes. Use mechanical support for 24 hours while the adhesive cures.

Cleanup
Clean tools and uncured adhesive residue immediately with mineral spirits in a well-ventilated area to the outdoors. Remove cured adhesive by carefully scraping with a sharp-edged tool.


20’ Shipping Container 8' High - Part Codes

Product Code

Description

Quantity

Sidewalls

     
CONSWCX44-5

CX44 - 5 boxes  (183.35 Square Feet)

2 10 Boxes

Endwall

     
CONEW

EW - 1 box 20 inserts  (72 Square Feet)

1 3 Boxes

UX 2.0 - 2 boxes   (80 Square Feet)

2

Ceiling

 
CONCEIL

CI - 1 box 57 inserts  (160 quare Feet)

1 5 Boxes
 

UX 2.0 - 4 boxes (160 Square Feet)

4

Add R-Value with InSoFast PLUS

It’s easy to increase your R-Value beyond R-10 code minimums while maintaining the engineered benefits of continuous InSoFast panels