Endwall (Container) 2.0 Flat Panel-Bundle

Product Overview

End Wall High Cube bundle is part of an assembly with enough material to finish the end wall of a High Cube container wall using the End Wall Inserts and a Flat 2.0 panels with studs. 

      • This bundle contains:
        • 1 (I-EWI) End Wall Insert Box = 20 pcs.
        • 2 (FP-2.0) 2.0″ Flat Panel = 10 panels  (5 panels/box) = 80 Sq.Ft.
      • SKU: CON-EW


3 box bundle contains 1 box of Endwall inserts and 2 boxes of 2.0 Flat panels

Endwall 2.0 Flat Panel Bundle

(FP-2.0) 2.0″ Flat Panel End Wall High Cube/Standard bundle is part of a assembly that has material to finish the end wall of a shipping container for either the interior or exterior applications. The(FP-2.0) 2.0″ Flat Panel and inserts is a two-step process insulated first with the (I-EWI) End Wall Inserts to infill the wall’s corrugated voids preventing hidden condensation. The (FP-2.0) 2.0″ Flat Panel (48″ x 24″) flat panels are installed over the inserts so that the black studs run horizontally, crossing over the container’s corrugations, providing maximum contact between the InSoFast studs and the steel container. 

    1. Universal method when modifying new or older containers with dings and dents.
    2. Insert fit the end wall corrugation.
    3. Electrical raceways are included
    4. (2) part fast track application.
Physical Properties (EWI) End Wall Inserts

Endwall Inserts

End Wall Inserts or the container’s nose corrugation.  One box of Inserts covers the end wall.

Endwall Insert Architectural Dimensions jpg
Insert Dimensions  zip file
See Diagram 5 1/4 in × 48in ×  1 5/8 in
Coverage per pcs 1.75 sq-ft
One Box -20 inserts 4′ long  (covers 35’ Sq-ft)
Interior side of the end wall  1 boxes
Exterior side of a the end wall 1 boxes 
R-Value ASTM C518 R-4 per in
ASTM C578 Type II


Closed-Cell, injection-molded EPS 

Canadian Standard CAN/ULC S701 Type 2
Foam Density 1 lbs per cubic foot
Shipping Containers
Physical Properties (FP-2.0) 2.0" Flat Panel


2.0, Flat Panel Details




UX2.0 zip file

Panel Dimensions

24in × 48in × 2in

Horizontal Chase

48in × 1in × ¾in

Vertical Chase 24in × ¾in × ¾in


R-Value ASTM C518


ASTM C578 Type II

Closed-Cell, injection-molded EPS

Canadian Standards  CAN/ULC S701 Type 2
ASTM C303 Foam Density

1.35 lbs per cubic foot

ASTM E96 Water Vapor Permeability

 (Class III Vapor Retarder) 3.5perm/in

Maximum Service Temperature (long term)

167°F = 75 Celsius (°C)

Co-Polymer Polypropylene Stud


Interlocking Edges


Cutting Indication Lines


Code Depth Raceways


Ready for Finishing






Moisture Control 

Channels on Back only

2″ thick  of closed-cell, injection-molded EPS foam body achieves R-8.5 insulation The UX2.0 is our thinnest flat panel, optimized for flat surface interior finishing. The 2.0 flat panel will work on floors, walls, ceilings adapted for shipping container construction. It is a good choice as a sub-flooring base panel for shipping containers.
Features Benefits
InSoFast engineered system of continuous insulation is perfectly suited for shipping container fabrication. 
  • Simple to install
    • Why work so hard?
    • Adaptable Attachment
    • No Special Tools Needed
  • Built-in Studs*
    • Engineered Framing Studs 
    • Non-conductive stud framing 
    • No energy penalty for the studs
    • Non corrosive stud…non rusting 
    • Adhesive Application no holes
  • Closed-cell high pressure fused EPS Insulation
  • Engineered for Shipping Containers
  • Lives up to its name: In So Fast

*The high-strength co-polymer plastic studs provide a positive attachment stud for finishing the container. The ribbed dovetails surface provides a cast-in-place adhesive applications against the metal surfaces. 


Estimating End Walls

Estimating and ordering is simple. Measure height and width multiply the measurements together for your total square footage minus openings. Add how many high cube or standard end wall surfaces your container project requires to complete the job. Divide the total square footage (xx) by 40 sq-ft. per box. This will determine the number of total boxes required for your project, (round up to the whole box count).  Don’t overestimate.

    • One  2.0″ Insulated Flat Panel = (8 sq.ft)
    • One box of  (5) 2.0″  Insulated Flat Panels = (40 sq.ft)
    • One box of End Wall Inserts = (35 sq.ft)
    • SKU: CON-EW

Don’t overestimate, cut studs and inserts can be re-used.

Estimating Adhesive


Buy Shipping Container Insulation Panels in Monroe, NC

Green Guard Certified Adhesive:

In Canada the Glue is LePage PL Premium

Estimating Adhesive Quantity

Estimating the amount of adhesive YOU will use has variables beyond our control like condition of your walls and how accurate are you with a glue gun? The example below is for one side wall of a 20′ standard height shipping container you will need approximately 3 tubes of the adhesive. That is in a perfect world. PL Premium 3x adhesive is applied in a ⅜” bead on the backside of the studs onto the ribbed surfaces.  We realize that a 3/8″ bead of glue is very subjective. It is important that there is enough adhesive to squish the dovetails on the back side of the stud when pressed to the container wall. Adhesive follows the “Goldie Locks rule, too much, too little, and just right To verify that enough adhesive is used, press the panel into place. Pull the panel back and check to see if the adhesive has spread out beyond the full width of the stud. It is normal for the panel to “float out” from the side of the container when it is accommodating irregularities in the container walls. Additional adhesive may be necessary in some areas. If you are doing it just right you can expect that 1 large 28-fl oz tube will cover 18 of our 24″ long studs or enough glue at a 3/8″ bead to cover 36 foot long bead of glue. 

Additionally you will have to estimate for glue around openings like windows and doors.

1 large 28-fl oz. / 828 mL tube = 18 (24″ studs or inserts)

  • CX-LP 46 (46 studs) = 46
  • 46 ÷ 18 = 2 1/2 tubes of the adhesive
  • I-SWI (30) = 1 tube of the adhesive


Rough estimate for  28 ounce tubes of adhesive required

Container Side Wall  End Wall Ceiling  Total Walls & Ceiling Floors Swing Doors Total Estimate
20′- Standard 2 1/2  6 1/2 13 1 1/2 3 18
20′- High Cube 2 1/2  6 1/2 14 1 1/2 3 19
40′- Standard 6 2 1/2  13 28 3 3 34
40′- High Cube 2 1/2  13 29 3 3 34

Important Notice: Container Surface Temperature Applications

When bonding EPS and XPS foam insulation, use above 40°F (4°C) and avoid cure and surface temperatures above 90°F (32°C). Surfaces must be clean, dry and free of frost, grease, dust and other contaminants. Pre-fit all materials and protect finished surfaces. If using cartridge format, cut nozzle at a 45° angle to desired bead size and puncture inner seal. Be very careful not to allow Loctite® PL® Premium to cure on a finished surface.

Technical Data

Shipping, Purchasing & Returns

Please read all the current Shipping, Purchasing & Returns *

Freight Dimensions Weight
Product Code

Number of Parts

Box Dimension

Cubic Feet Per Box

 Weight Per Box




EW Inserts 20 pcs. 35 SqFt 14″ 14″ 49″ 5.56 10 Lbs
UX2.0 5 Panels 40 SqFt 11″ 25″ 49″ 7.80 20 Lbs


5 Panels 40 SqFt





22 Lbs

Add R-Value with InSoFast PLUS

It’s easy to increase your R-Value beyond R-10 while maintaining the engineered benefits of the continuous InSoFast panels. Just start with a base of feature-rich InSoFast panels.