Physical Properties
PHYSICAL PROPERTIES OF INJECTION-MOLDED EPS
| Property | ASTM Test | Result |
| Closed-cell Foam Density (nominal) | C303 | 1.35lb/ft |
| Compressive Resistance at 10% Strain Deformation | D1621,C165,C203 | 13.0psi (90kPa) |
| Flexural Strength | D1621,C165,C203 | 30.0psi (208kPa) |
| Thermal Conductivity (R-Value) at 75°F±2°F | C177,C518 | R4.45/in |
| Water Absorption by Total Immersion (Moisture Resistance) | C272 | 3% by volume |
| Water Vapor Permeability (Class III Vapor Retarder) | E96 | 3.5perm/in |
| Capillarity | --- | none |
| Maximum Service Temperature (long term) | --- | 167°F = 75 Celsius (°C) |
| Maximum Service Temperature (intermittent) | --- | 180°F = 82 Celsius (°C) |
| Flame Spread | E84-81A | 5 @ 4" |
| Smoke Developed | E84-81A | 105-190 |
COPOLYMER STUD FASTENER AND ADHESION
| Property | ASTM | Result |
| #6 1¼in Standard Drywall Screws Pull Out (Fastener Withdrawal) | D1761-06 | 211lb/ft |
| #6 1¼in Standard Drywall Screws Shear (Lateral Screw Resistance) | D1761-06 | 403lb/ft |
| Adhesion of PL Premium Adhesive and Stud (Peak Stress) | D4541-02 | 108psi (972ps/lf) |
« Scroll line below for more drawings »
Details and Drawings
- |Conex Container Detail|
- |Flat Panel Details|
- |Above-Grade Interiors|
- |Below-Grade Interiors|
- |Windows, Doors and Openings|
- |Below-Grade Exteriors|
- |Interior Water Management and Soil Gas System|
- |Above-Grade Exteriors|
- |Exterior Wall Details|
- |Exterior Wall Corner Details|
- |Exterior Wall Window Details|
- |Other|
Container Insulation Details |
CX44 Zip File | ||
| CX44 Panel Details | dwg | dxf | |
LowPro Sidewall Insulated Stud |
CX-LP Zip File | ||
| Sidewall LowPro-Insulated Stud | dwg | dxf | |
LowPro Endwall Insulated Stud |
CX-EW Zip File |
||
| Endwall LowPro-Insulated Stud | dwg | dxf | |
Shipping Container Inserts |
|||
| Sidewall Insert | jpg | zip file | |
| Endwall Insert | jpg | zip file | |
| Ceiling Insert | jpg | zip file | |
InSoFast Stud |
|||
| InSoFast Stud Details | dxf |
pdf |
UX 2.0 Flat Panel Details |
UX2.0 zip file | ||
| UX 2.0, Flat Panel Details | dxf | pdf |
|
| All UX 2.0 Flat Panel Details | pdf |
||
EX2.5 Flat Panel Interior Details |
EXi 2.5 zip file | ||
| EXi 2.5 Flat Panel Details (Interior applications) | dwg | dfx | |
| InSoFast Interior Architectural Submittal Sheet | |||
EX2.5 Flat Panel Exterior Details |
EXe 2.5 zip file |
||
| EXe 2.5 Flat Panel Details (Exterior applications) | dwg | dfx | |
| InSoFast Exterior Architectural Submittal Sheet | |||
| EX 2.5, All Exterior Application Details | |||
| InSoFast Stud | |||
| InSoFast Stud Details | dxf | pdf |
| Above-Grade Interior CMU (Steel Bar Roof) | dxf | |
| High R-Value System (InSoFast PLUS) | dxf | |
| Double InSoFast System | dxf | |
| Over Existing Wood Framing | dxf | |
| Over Existing Steel Framing | dxf | |
| High R-Value System (InSoFast PLUS) Over Existing Wood Framing | dxf | |
| High R-Value System (InSoFast PLUS) Over Existing Steel Framing | dxf |
| Basement CMU: Interiors | dxf | ||
| Basement CMU: Half Basement Interior Lookout Ledge | dxf | ||
| Basement CMU: to Start of Grade | dxf | ||
| Basement Interior with Above-Grade Exterior CMU, Standard Wood Framing Interior | dxf | ||
| Basement Interior with Above-Grade Exterior CMU, to Start of Grade | dxf | ||
| Basement Interior and Exterior with Above-Grade Exterior CMU, (New Construction) | dxf | ||
| Above-Grade Interior with Full Length Exterior, (Steel Bar Roof) | dxf |
| Windows, Doors, and Openings | ||
| Window CMU, Drywall Return over InSoFast | dxf | |
| Window CMU, Drywall Return over Wood Framing | dxf | |
| Window CMU, Wood Extension Jamb and Trim | dxf | |
| Window CMU, Wood Extension Jamb and Trim with Solid-Backing | dxf | |
| Window CMU, Inset Retrofit | dxf | |
| Window CMU, Flush Retrofit | dxf |
| Below-Grade Basement Exteriors | ||
| Basement Exterior CMU: to Start of Grade | dxf | |
| Basement Exterior CMU: to Start of Siding | dxf | |
| Basement Exterior CMU: to Start of Siding (w/ Trimboard and Sub-sill) | dxf | |
| Basement Exterior CMU: New Construction | dxf | |
| Exterior CMU: Manufactured Stone Knee Wall | dxf |
| Basement Interior Air Sealing and Water Management Systems | ||
| Basement Moisture Reduction and Soil Gas Removal Systems | ||
| Basement CMU: Interior Perimeter Drainage | dxf |
| Above-Grade Exteriors | pdf |
|
| CMU Above-Grade Exterior to Frost Line | dxf | |
| CMU New Construction | dxf | |
| Wood-Framed Above-Grade with Manufactured Stone | dxf | |
| CMU Manufactured Stone Knee Wall | dxf | |
| Wood-Framed Walls | dxf | |
| Wood-Framed Walls, Over Existing Siding | dxf | |
| Steel-Framed Walls | dxf |
| Exterior Wall Details, All | |||
| Wall Sections, All | |||
| Top of the Wall | |||
| InSoFast Vertical Wall Section | dwg | dfx | |
| InSoFast over 16″ O.C. Framing | |||
| InSoFast Over Sheet Foam | dwg | dfx |
| Inside Corners, All | |||
| Outside Corners, All | |||
| Foam Over 2x Backer | dxf | dwg | |
| Foam Under 2x Backer | dxf | dwg | |
| InSoFast No Backing | dxf | dwg | |
| ZipWall Backer Over Foam Board | dxf | dwg | |
| Zip Wall No Backer | dxf | dwg | |
| Foam Over Backer Stud | dxf | dwg | |
| Sheet Metal Backer | dxf | dwg | |
| Sheet Metal Strapping Backer | dxf | dwg | |
| InSoFast Over Additional Sheet Foam No Backer | dxf | dwg | |
| InSoFast With Additional Sheet Foam No Backing | dxf | ||
| Inside Corner No Backing | dxf | dwg | |
| Inside Corner 2x Backer With Foam | dxf | dwg |
| Outset Windows, All | |||
| Inset Windows, All | |||
| Outset Window Sill Section | dxf | dwg | |
| Outset Window Head Jamb Section | dxf | dwg | |
| Outset Window Horizontal Section | dxf | dwg | |
| Outset Window with 2×3 Framing Head Jamb Section | dxf | dwg | |
| Outset Window with 2×3 Framing Horizontal Section | dxf | dwg | |
| Outset Window with 2×3 Framing Sill Section | dxf | dwg | |
| Inset Window Head Jamb Section | dxf | dwg | |
| Inset Window Horizontal Section | dxf | dwg | |
| Inset Window Sill Section | dxf | dwg |
NFPA 285 Wall Assemblies
National Fire Protection Association (NFPA) in the International Building Code states that - wall assemblies shall be tested in accordance with and comply with the acceptance criteria of NFPA 285. InSoFast has tested and passed these stringent guidelines, here are a few of the possibilities that will work with the InSoFast continuous insulation panel. Please contact us for specific details.Steel Frame Assemblies
Load Bearing Masonry Assemblies
Guides, Brochures, and Comparisons
| Basic Interior Installation | ||
| Corners | ||
| Uneven Walls | ||
| Top of the Wall and InSoFast | ||
| Windows and Framing How to | ||
| InSoFast Electrical Wiring Guide | ||
| Floor Installation Instructions | ||
| Basement Cost Comparison | Blog |
|
| Basic Exterior Installation | ||
| Exterior Cost Comparison | Blog |
|
| Basic Container Installation | ||
| Insulating a shipping container door | pdf |
|