EXi 2.5 Panel Bulk Pricing
For project orders, you will need to know the total square footage of the surface you wish to insulate.
|Sq-Ft||Boxes||per Sq-Ft||per Box|
|40 - 800||1 - 20||$ 2.49||$ 99.40|
|840 - 1600||21 - 40||$ 2.31||$ 92.40|
|1640 - 2400||41 - 60||$ 2.21||$ 88.40|
|2440 +||61 +||Call for pricing|
Adjust your quantity to display the number of panels included, and the square footage covered.
We offer free shipping on all our orders. You may upgrade a project order to FedEx Home Delivery for an additional charge. Please read through our shipping and purchasing policies before placing your order.
We offer volume-discounted pricing on full project orders. Each panel covers 8 sq-ft. Don’t overestimate, cut panels can be re-used.
1 box (at $99.40/per box), containing a total of 5 EXi 2.5 Panels, covering up to 40 sq-ft.
R-10 Continuous Insulation
At 2½-in thickness, the EX 2.5’s closed-cell, injection-molded EPS foam body achieves R-10 insulation.
EPS is a non-toxic, inert insulation that maintains its R-value throughout the life of your building. Because it does not absorb moisture like open-cell types of bead board, it is rated highly for below-grade applications like basements. The EPS body has a fire-retardant material and serves as a Class III vapor barrier.
Each panel is co-molded with three high-strength polypropylene studs that align every 16-in O.C. The anterior surfaces are fully embedded by a ½-in of insulation while the posterior surfaces feature ribbed dovetails for adhesive applications against interior concrete, stone, metal or brick walls.
They provide a straight surface that can support drywall attachment and exterior finishes as well as adornments like cabinets and TVs. They are not prone to moisture damage, and do not conduct heat along a wall system.
Self-Leveling Tongue-and-Groove Interlocks
Four tightly interlocking edges along each panel form a continuous, self-flashing seal. Unlike traditional flashing tapes, the interlock create a resilient seal that will not change shape, dry or crack over time. They eliminate the potential for mistaken thermal leaks and prevent water from reaching the face.
A notched alignment system ensures the panels and studs stay aligned during installation even when cut. Inset lines demarcate the location of wiring chases.
Built into the front and back of the EX panel is a network of shingle-style capillary channels. They comply with Oregon Residential Speciality Code section R701.1 allowing the panel to serve as a certified rainscreen for exterior applications.
The channels are specifically-sized cavities that moderate wall pressure so that both interior and exterior wall assemblies can drain and be allowed to remain dry.
Electrical raceways run vertically at 16 inches on center and horizontally at 24 inches on center.
This grid provides easy access to pull wiring to any location. Located at code-approved depth, the chases also provide the necessary separation from the drywall face to protect the wiring.
|Panel Body Dimensions||24in × 48in × 2½in|
|Drainage Channel Dimensions||24in × ¼in × ¼in|
|Horizontal Chase Dimensions||48in × 1in × ¾in|
|Vertical Chase Dimensions||24in × ¾in × ¾in|
|Continuous Insulation R-Value||R-10|
|Comparable Performance to||2×4 Wall/R-15 Batts|
|Fully Insulated Composite Studs||Recessed ½in below surface|
|Tongue-and-Groove Interlocking Edges||Improved tightness aids structural self-leveling|
|Cutting Indication Lines|
|Electrical Raceways at Code Depth|
|Designed Ready for Finishing Attachment||Both Interior/Exterior (drywall, siding, etc)|
|Designed for Basement||Improved performance over UX 2.0|
|Designed for Exteriors||Improved performance over UX 2.0|
|Moisture Control||ORSC, Section R703.1.1-approved rain screen and drainage technology on both sides|
Add R-Value with InSoFast PLUS
It’s easy to increase your R-Value beyond R-10 code minimums while maintaining the engineered benefits of continuous InSoFast panels